Validating Meyl's Device

On coil B, at 13MHz, the LED at receiver side turns on and the transceiver side turns off. The measurement shows that there is overunity. This is verified by hooking on the same scope channel. (My scope has slight error on different channel) However, then i switched to AC load the power is so much less and no overunity. I wonder why the voltage can turn lower than Vf of LED when I used AC load. Hooking up the probe will turn off the LED and I have to invert the polarity. Could this probing cause the AC load to be low? I remember switching to AC load the transmitter LED turns on. When the probe sucks the power from receiver's LED did the transmitter LED turns on ? Answer: The scope connects the ground point between the channel. Hence, it affects the measurement when we change the polarity.
Coil B @14Mhz without the metal ball, when the transmitter primary and receiver load ground are connected, the LED will turn on. Overunity observed.

Coil B @13Mhz and 20cm ground wire, the transmitter's LED will light up when I switched to AC and DC load. But for LED, the transmitter's LED will turned off. When I used 1m ground wire, the transmitter LED will never turn on regardless of AC load,DC load or LED at receiver side. Slight overunity observed when used with 1m ground wire. However when the amplitude is pumped up the overunity is less obvious. Overunity disappeared with higher amplitude. How about 6m ground wire?

It is weird to see that when I put the jumper for LED on transmitter side the power consumption is reduced compared to without LED jumper and the receiver power increased. Trying with LEDs in parallel does not affect the overunity power. What if the LED is in series, can I pump up the amplitude while maintaining overunity?

Does square wave improve overunity because of fast rise time and back EMF?

Update on Steven Mark's TPU

The patent was not sold to MPI. MPI maintain a different technology. Steven Mark refers to Valve Amplifier 3rd Ed. pg 262, "The inrush of current through the filament interacts with the earth's magnetic field to produce a small kick." This small kick is huge when you have multiple kick added together.

Steven understands Tesla impulse current in Edison's DC generator. The kick came out of the wire perpendicularly. The kick is about how fast the capacitor discharged and how fast Tesla stops the current flow AT the spark gap. His goals were to get the time in which the discharge is STOPPED to be much quicker. As Tesla did this he found that the perpendicular radiations, the ones from the wires, caused electrical effects to appear in wires and other copper/metal materials near the STOPPED current/discharge. These electrical effects could be made to create electrons on other wires and copper around his STOPPED current/discharge wire.

This looks like cross talk effect by impulse current.

Theory on Wardenclyffe Failure

The story is frequently told that when Morgan found out from Tesla that the true purpose of the Wardenclyffe transmitter was to provide free electricity to the world, he abruptly pulled the funding. That's not completely accurate. The economic conditions were recessionary at the time and the stock market had taken a considerable dip that year. Morgan wasn't interested in risking any more capital in perilous times on a project he couldn't fully fathom and wasn't completely convinced of. Tesla held land ownership of the Wardenclyffe site and tower, but no further work was done after 1910. In 1914, Tesla was deeply in debt and signed over the deed of Wardenclyffe Station to pay off years of back rent due to the owners of the New Yorker Hotel where he was living (he occupied two penthouse suites in the hotel). In 1917, the hotel owners had the tower demolished and its parts sold for salvage. Despite the loss of Wardenclyffe, Tesla continued to refine his understanding of Radiant Energy and miniaturize the equipment needed to produce it. He eventually was able to reduce the equipment down to the size of a suit case.
http://www.rense.com/general11/tesla.htm

Time Reversal

What is time reversal? According to TD Lee, time reversal is lika a film on a drop of water from faucet hitting the sink and making a splash, when shown backward, start from gathering of splash, reform the drop and goes back to faucet.

Secret about Tesla Magnifying Transmitter

Even by closing the loop on the spiral pancake coil, the overunity still exists. This really defy the current known circuit theory since any transformer can yield higher output power.

Tesla remote control for boat

At about this same time, in 1898, Tesla invented and displayed his spectacular remote control torpedo boat at the Electrical Show at Madison Square Garden, a magnificent building financed by Morgan and designed and managed by the flamboyant architect Stanford White. This machine, which Tesla called the teleautomaton, contained all of the principles of the radio, electrical action at a distance and also the robot. The press billed the creation as a “torpedo boat without a crew”

Did Tesla transmit power to the boat as well? No, it has a storage battery placed within it. Read more from this website.

Tesla lighting up wireless bulb

Here the picture shows Tesla lighting up wireless bulb. The huge pancake coil is at the background. Tesla is holding one bulb in his hand and a loop wire in another hand.

Figure 1 Nikola Tesla sending 500KV through his body to illuminate a vacuum lamp in a multiple exposure photograph [circa,1898]

Figure 2 Picture of Tesla demonstrating the wireless power transmission at Madison Square Garden. Same picture as Figure 1. Here you will see a transmitter at the background in addition of the pancake coil.

Figure The high tension current being passed through the body before it excites the lamps to incandesence. The loop is held over the resonating coil by Mr Clemens (Mark Twain). Tesla seems to be at the background. From the April 1895 Century Magazine.

Figure :Wireless energy transmission demonstration during Tesla's high frequency and potential lecture of 1891.

You can see two plate beside Tesla. Tesla said power can be transmitted through natural medium such as sea,lakes,earth and atmosphere. In atmosphere, if the breakdown voltage is exceeded the gas become ionized. In the picture, a high power ultraviolet beam might be used to form a vertical ionized channel in the air directly between the transmitter receiver station. The picture below shows the circuitry.

Figure : Tesla illuminating two exhausted tubes by means of a powerful, rapidly alternating electrostatic field created between two sheets of metal suspended from the ceiling on insulating cord.

The Tesla effect is the application of a type of electrical displacement, i.e., the passage of electrical energy through space and matter, other than and in addition to the development of a potential across a conductor. Tesla stated,

"Instead of depending on [electrodynamic] induction at a distance to light the tube [... the] ideal way of lighting a hall or room would [...] be to produce such a condition in it that an illuminating device could be moved and put anywhere, and that it is lighted, no matter where it is put and without being electrically connected to anything. I have been able to produce such a condition by creating in the room a powerful, rapidly alternating electrostatic field. For this purpose I suspend a sheet of metal a distance from the ceiling on insulating cords and connect it to one terminal of the induction coil, the other terminal being preferably connected to the ground. Or else I suspend two sheets as [...] each sheet being connected with one of the terminals of the coil, and their size being carefully determined. An exhausted tube may then be carried in the hand anywhere between the sheets or placed anywhere, even a certain distance beyond them; it remains always luminous."

and

“In some cases when small amounts of energy are required the high elevation of the terminals, and more particularly of the receiving-terminal D' may not be necessary, since, especially when the frequency of the currents is very high, a sufficient amount of energy may be collected at that terminal by electrostatic induction from the upper air strata, which are rendered conducting by the active terminal of the transmitter or through which the currents from the same are conveyed."

Tesla also mentioned that wire can be heated and melted but not to humans.

"I have produced electrical oscillations which were of such intensity that when circulating through my arms and chest they have melted wires which joined my hands, and still I felt no inconvenience. I have energized with such oscillations a loop of heavy copper wire so powerfully that masses of metal, and even objects of an electrical resistance specifically greater than that of human tissue brought close to or placed within the loop, were heated to a high temperature and melted, often with the violence of an explosion, and yet into this very space in which this terribly-destructive turmoil was going on I have repeatedly thrust my head without feeling anything or experiencing injurious after-effects. " from Century Magazine, June 1900

More details on these in Century Magazine.