The trick is spiral coil

"Reference articles are attached showing the use of “broadband spiral antennas” and phase conjugate mirrors for amplifying electromagnetic frequencies that make up quantum noise. The tunneling current in the diodes can also be influenced by the use of magnetic fields as low as 10 gauss as well."

Thomas Valone,"Proposed Use of Zero Bias Diode Arrays as Thermal Electric Noise Rectifiers and Non-Thermal Energy Harvesters.",Proceedings of Space, Propulsion and Energy Sciences International Forum (SPESIF), Feb 24 2009.

Adding Battery

I hooked up the AC source to the base and emitter of MJ21194 transistor. The collector is connected to the positive polarity of 12V 7Ah lead acid battery. The negative polarity of the battery to the positive side of coil B. The receiver side of coil B has no load connected. The power blow up the LED at the transmitter side of coil B. Note: There is no return ground to the AC source and the coil B negative polarity. Hooking up too long does not blow up the second LED but the 0 ohm resistor is putting out smoke.

My intention is to pump the battery without killing the dipole and observe battery does not die out.